Detailed Product Description

Flowmeters, produced by Shanghai Kent and have gain CE certificate , can be widely used to measure volumetric flow of overheated & saturated steam, compressed air & general gas, water and fluid etc in food industry .

Technical Features:

• No moving parts, high reliability and durability
• Convenient installation and maintenance
• Sensor not connect with the measured fluids directly, stable performance and long service life
• Output pulse signal is directly proportional to flow rate, high accuracy and no zero drift
• Wide measuring range, turndown ratio 10:1
• Low pressure loss, low cost
• Frequency output not affected by the fluid change in physical character and composition, meter factor (K) only considers shape and dimension of eddies. Measurement of volumetric flow can get compensation once it needs. Then no re-calibration meter factor needed if damaged parts be exchanged
• Wide application for steam, gas, liquid   

Technical Specifications:

• Size: DN15 ~ DN500
• Medium: Liquid / Steam / Gas
• Accuracy: Pipe Type: ±1.5% (gas, steam), ±1.0% (liquid); Inserted Type: ±2.5% (liquid), ±3.0% (gas)
• Repeatability: Pipe Type: 0.5% (gas, steam), 0.33% (liquid); Inserted Type: 0.83% (liquid), 1.00% (gas)
• Rated Pressure: 1.6MPa, 2.5MPa, 4.0MPa, 6.4MPa
• Signal Output: Pulse Output, Two Wire 4~20mA DC, RS-485, Hart, Modbus
• Power Supply: 24V DC / 3.6V Lithium Battery/ Double Power Supply( 24V DC, 3.6V Lithium Battery)
• Installation type: Wafer Type / Fixed Inserted / Adjustable Inserted / Adjustable Inserted (with ball valve)
• Protection Grade: IP65
• Explosion Proof: Exd II BT4/ Ex ia IIC T4
• Fluid temperature: -40 ~ +250^oC (-40 ~ +120^oC for insterted), +100 ~ +350^oC (high temperature)